Polyaspartic and epoxy coatings, installed by certified applicators in a single day. Mirror-finish, UV-stable, chemical-resistant — and warrantied for the life of the home.
Standard epoxy yellows in sunlight, chips under hot tires, and takes a week to cure. Modern polyaspartic systems solve every one of those problems — and we've been specifying them long enough to know the difference shows.
Polyaspartic coatings cure four times harder than standard epoxy, in a fraction of the time. The result is a floor you can park on the same evening it was installed — and a finish that resists hot tires, road salt, brake fluid, and ultraviolet light for decades.
Eighty percent of a coating's longevity is decided before the first drop is poured. We mechanically diamond-grind every slab to a fresh, profiled surface — never acid-etch, never solvent-wash. Cracks are routed and filled with structural polymer. Joints are honored or hidden by design.
Choose from broadcast vinyl flake blends in over 40 designer combinations, solid-color metallic systems, quartz aggregate for slip resistance, or honed concrete-look pours that read as polished stone.
Most full two- and three-car installs are complete in a single working day. Vehicles return to the garage in 24 hours.
The slab is mechanically profiled. All dust is HEPA-contained at the tool.
Cracks are routed, filled, and a 100% solids polyaspartic primer is applied.
Designer flake is broadcast into the wet coat, scraped flat, and sealed with high-build topcoat.
We walk the floor with you in natural light. Foot traffic resumes overnight. Vehicles, 24 hours.